GH2132 ( Incoloy A-286 / UNS S66286 / W.Nr.1.4890 )

Good comprehensive properties and ultra high yield strength, at termperature lower than 700 DEG C, used for turbine disk, rings, punching press welding parts and fastener etc.

GH3030

The alloy has the advantages of stable structure, low aging tendency and good oxidation resistance, and can be used in the combustion chamber of 800 DEG C and the afterburner spare parts

GH3128

The alloy has the advantages of good comprehensive performance, long service life, good oxidation resistance, good structure stability and good welding function. The alloy is mainly used for the combustion chamber of a turbine engine with a working temperature of 950 DEG C and an afterburner.

GH4145 ( Inconel X-750 / UNS N07750 / W.Nr. 2.4669 / NiCr15Fe7TiAl / AFNOR NC15TNbA )

The alloy has the advantages of sufficient strength and corrosion resistance and oxidation resistance at 980 DEG C, and is a high strength spring first choice material, which is suitable for manufacturing elastic diaphragm and elastic sealing element.

GH4169 ( Inconel 718 / UNS N07718 / W.Nr. 2.4668 / NiCr19Fe19Nb5Mo3 / NA51 /  AFNOR NC19FeNb )

The alloy austenite structure, precipitation hardening of the gamma phase so that it has excellent mechanical properties, due to its high temperature strength and excellent corrosion resistance and easy processing at 700 DEG C, widely used in various high temperature applications.

GH4080 ( Nimonic 80A / UNS N07080 )

The alloy has a high temperature strength at 700-750 DEG C, and has good oxidation resistance at 950 DEG C, which is suitable for the field of high strength and corrosion resistance.

MONEL 400

The alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas, and is suitable for pipe fittings and valves etc for chemical industry, petroleum, atomic energy, marine development.

MONEL K500

The alloy has good mechanical properties, high strength and good corrosion resistance, and is suitable for fasteners and structral parts etc which used in chemical industry, ship and ocean engineering.

NICKEL 200 (  UNS N02200 / DIN. W.Nr. 2.4060 )

The alloy is from pure commercial (99.6%) nickel, has good mechanical properties and excellent corrosion resistance, high thermal conductivity, low gas content and low vapor pressure. Mainly used in food processing equipment, salt refining equipment, mining and ocean mining. High temperature above 300 DEG C for manufacturing industrial sodium hydroxide required equipment.

NICKEL 201 (  UNS N02201 / DIN. W.Nr. 2.4060 )

The alloy is a commercially pure nickel with very low carbon content and has been approved for use in a high temperature environment of up to 1230 degrees Celsius.

INCONEL 600 ( GB NS312 / UNS N06600 / DIN W.Nr.2.4816 / DIN NiCrl 5Fe / BS NA14 / AFNOR NC23FeA )

The alloy has high corrosion resistance against various corrosive media, also has good anti creep rupture strength. Recommended for the above 700 C working environment, mainly used for corrosive alkali metal production and application, especially the use of sulfide in the environment.

INCONEL 601 ( GB NS313 / UNS N06601 / DIN W.Nr.2.4851 / DIN NiCr23Fe / AFNOR NC23FeA )

One of the most important properties of the alloy is its oxidation resistance and good carbonation resistance at temperatures up to 1180 DEG C, which are mainly used in heat treatment processing parts, exhaust system components, oxidation and re heater.

INCONEL 625 ( GB NS336 / UNS N06625 / DIN W.Nr.2.4856 / DIN NiCr22Mo9Nb / BS NA21  / AFNOR NC 22 DNb )

The alloy exhibits excellent corrosion resistance in many media, and the low carbon alloy 625 is widely used in the chemical process industry, and in the field of contact with seawater and high mechanical stress.

INCONEL 718 ( GB GH4169 / UNS N07718 / DIN. W.Nr. 2.4668 / DIN. NiCr19Fe19Nb5Mo3 / BS NA51 /  AFNOR NC19FeNb  )

The alloy has austenite structure, precipitation hardening of the gamma phase so that it has excellent mechanical properties. Because of its high strength and excellent corrosion resistance and easy processing at 700 DEG C, widely used in various high temperature applications.

INCONEL X-750 ( GB GH4145 / UNS N07750 / DIN. W.Nr. 2.4669 / DIN. NiCr15Fe7TiAl / AFNOR NC15TNbA )

The alloy has the advantages of sufficient strength and corrosion resistance and oxidation resistance at 980 DEG C, and is a high strength spring first choice material, which is suitable for manufacturing elastic diaphragm and elastic sealing element

INCOLOY 800 ( GB NS111 / UNS N08800 / W.Nr.1.4876 / DIN. X10NiCrAlTi3220 / BS NA15 / AFNOR Z8NC32.21 )

INCOLOY 800H ( GB NS112/ UNS N08810 / DIN. W.Nr.1.4958 / DIN. X5 NiCrAlTi 31-20 / BS NA15H )

INCOLOY 800HT ( UNS N08811 / DIN. W.Nr.1.4959 / DIN. X 8 NiCrAlTi 32-21 )

Above 3 kinds of alloys belong to 3 types of products in the same series of Ni Fe Cr alloy. It has good corrosion resistance, creep resistance and oxidation resistance in high temperature. They are mainly used in heat treatment equipment, covering device for resistance alloy tubular heating elements, chemical and petrochemical processing equipment

INCOLOY 825 ( GB NS142 / UNS N08825 / DIN. W.Nr.2.4858 / DIN. NiCr21Mo / BS NA16 / AFNOR NC21FeDu )

This alloy is a kind of general engineering alloy, with acid and alkali corrosion resistance in oxidizing and reducing environment, high Ni content make alloy with effective resistance to stress corrosion cracking resistance, widely used in all kinds of temperature does not exceed 550 degrees in industrial environment

INCOLOY 901 ( UNS N09901 )

This alloy is a precipitation hardening, creep heat resisting alloy. It has higher yield strength and endurance strength in 650 DEG, 760 DEG C good oxidation resistance, stable for long-term use. Widely used in rotary shaped parts and ground gas turbine aircraft engine in 650 DEG C (the turbine wheel, compressor disc, shaft the neck, etc.) static structure, turbine outer ring and fasteners and other parts

INCOLOY 925 ( UNS N09925 )

The alloy has good mechanical strength and corrosion resistance, and is widely used in oil and gas drilling equipment

INCOLOY 926 ( UNS N08926 / DIN W.WR. 1.4529 / Mo6CuN )

The alloy has a chemical composition similar to that of 904L stainless steel, and the nitrogen content is increased to about 0.2%, and the molybdenum content is about 6.5%. The alloy is mainly used in marine engineering, acidic gas environment and flue gas desulfurization system.

HASTELLOY B ( GB NS321 / UNS N10001 )

1. Control of iron and chromium content to a minimum to prevent the generation of β-phase Ni4Mo.

2. Excellent corrosion resistance of reductive environment.

3. An excellent resist to concentration sulfuric acid medium and large number of non-oxidizing acid corrosion.

4. A very good resistance of chloride reduction of stress corrosion cracking (SCC).

5. Good corrosion resistance of various organic acids.

Hastelloy B has been widely used in the fields of chemical, petrochemical, energy production and pollution control, especially in sulfuric acid, hydrochloric acid, phosphoric acid, acetic acid and other industries

HASTELLOY B-2 ( GB NS321 / UNS N10001 )

This alloy is a kind of anti corrosion solution, nickel molybdenum alloy state, face centered cubic lattice structure. Through the control of iron and chromium content in the minimum value, it can reduce machining brittleness, prevent Ni4Mo precipitates in 700-870 DEG C. The alloy is widly used in field of chemical, petrochemical, energy and pollution control, especially in sulfuric acid, hydrochloric acid, phosphoric acid, acetic acid and other industries

HASTELLOY C

The alloy is a nickel chromium molybdenum alloy, containing tungsten, and very low content of silicon and content. In oxidizing and reducing conditions, has excellent corrosion resistance to most corrosive medium, has excellent resistance to corrosion, crevice corrosion and stress corrosion cracking.

HASTELLOY C-4 ( UNS N06455 /  DIN W.Nr.2.4610 / DIN NiMo16Cr16Ti / ISO NiMo16Cr16Ti )

Hastelloy C-4 is a kind of low carbon austenitic nickel - molybdenum - chromium alloy, low carbon, silicon, iron, tungsten, which shows excellent metallurgical stability at

650-1040 DEG C, improve the ability of resistance to intergranular corrosion, in the condition of appropriate manufacturing under the edge line corrosion sensitivity and welding seam corrosion heat to avoid the affected area. Due to the high content of molybdenum and chromium, Hastelloy C-4 alloy can resist the erosion of various chemical media, including reducing medium, such as phosphoric acid, hydrochloric acid, sulfuric acid, chlorine, organic or inorganic chlorine medium. Due to the high nickel content, Hastelloy C-4 can effectively resist the stress corrosion cracking caused by chlorine, and even hot chloride solution.

Hastelloy C-4 has been widely used in most chemical field and high temperature environment, such as flue gas desulfurization system, pickling and acid regeneration plant, the production of acetic acid and agricultural chemicals, titanium dioxide production (chlorine), electrolytic plating.

HASTELLOY C-276 ( UNS N10276 /  DIN W.Nr.2.4819 / DIN NiMo16Cr15W / ISO NiMo16Cr15Fe6W4 / AFNOR NC17D )

The alloy is a nickel chromium molybdenum alloy, containing tungsten, and very low content of silicon and content. In oxidizing and reducing conditions, has excellent corrosion resistance to most corrosive medium, has excellent resistance to corrosion, crevice corrosion and stress corrosion cracking.

The alloy has been widely used in chemical and petrochemical fields, such as the application of chloride containing organic compounds in the contact element and the catalytic system. This material is particularly suitable for high temperature, mixed with impurities of inorganic acids and organic acids (such as formic acid and acetic acid), the use of sea water corrosion environment

UNS N06059(Alloy59)/EN 2.4605

Alloy59 is a alloy containing aluminum, with extremely lower element of silicon, carbon. In the oxidation and reduction states, with an excellent corrosion resistance to most corrosive media. Excellent with pitting corrosion、crevice corrosion、stress corrosion、cracking performance resistance. Coralloy59 is widely used in chemical industry and petrochemical industry

HASTELLOY C22 ( UNS N06455 /  DIN W.Nr.2.4610 / DIN NiMo16Cr16Ti / ISO NiMo16Cr16Ti )

The Hastelloy C-22 alloy is an all powerful Ni-Cr-Mo-W alloy, which has better corrosion resistance than other existing Ni-Cr-Mo alloys, including Hastelloy C-276, C4 alloy and 625 alloy.

The Hastelloy C-22 alloy has excellent resistance to pitting corrosion, crevice corrosion and stress corrosion cracking. It has excellent antioxidant capacity in aqueous media, including wet chlorine, nitric acid or mixed acid containing oxidizing acids containing chloride ions. At the same time, the Hastelloy C-22 alloy also has the ability to resist the reduction and oxidation environment encountered during the ideal resistance.

Depending on this versatile performance, it can be used in a number of troubling environment or in production plants with a variety of purposes. The Hastelloy C-22 alloy have unusual resistance to various chemical environments, including strong oxidizing substances, such as ferric chloride, copper chloride, chlorine, thermal pollution solution (organic inorganic), formic acid, acetic acid, acetic anhydride, water and salt solution. Hastelloy C-22 alloy has the ability to resist the formation of grain boundary precipitates in the weld heat affected zone, so that it can be applied to many chemical processes in the welding state

NITRONIC 50 ( UNS S20910 / AISI XM-19 )

The alloy is nitrogen - enhanced austenitic stainless steel, by comparing to any other commercial materials, it has the perfect combination of corrosion resistance and strength. The corrosion resistance of this material is better than that of alloy 316316L, 317317L, and the yield strength at room temperature is about two times that of these alloys. In addition, Nitronic 50 has excellent mechanical properties at high temperatures and at low temperatures, which is different from the majority of austenitic stainless steel. Nitronic 50 does not have magnetic properties at low temperature. The yield strength of high strength (HS) Nitronic 50 is about 3 times as much as that of 316 stainless steel.

It  is widely used in the ocean, nuclear power, chemical and oil and gas industries  

NITRONIC 60 ( UNS S21800 / AISI ALLOY 218 )

Compared with cobalt and high nickel alloy, Nitronic 60 stainless steel to achieve anti corrosion and wear resistance at very low cost. 304 of its overall corrosion resistance than most medium in Nitronic 60, anti chloride pitting ability is better than 316. The yield strength at room temperature is almost two times of 304 and 316. Nitronic 60 has excellent resistance to high temperature oxidation and low temperature impact resistance. Widely used in electric power, chemical, petrochemical, food and oil and gas industries, including the expansion joints wear plates, wear-resistant pump rings, bushings, process stem, seals and logging equipment.

ALLOY 20 ( UNS N08020 )

The alloy has excellent resistance to stress corrosion cracking ability and good resistance to partial reduction of composite medium corrosion ability. It is applied to the device of industrial sulfuric acid solution and sulfuric acid containing halogen ions and metal ions.

ALLOY 20Cb-3 ( GB NS143 / UNS N08020 / DIN W.Nr. 2.4660 )

It is a kind of corrosion resistance alloy, has many excellent properties, good oxidation resistance and medium reduction corrosion resistance ability, excellent resistance to stress corrosion cracking ability and good resistance to local corrosion, corrosion resistance is satisfactory in many chemical process medium. Mainly used in hydrometallurgy and sulfuric acid plant.  

ALLOY 28 ( UNS N08028 )

It is Ni-Fe-Cr alloy, by adding molybdenum and copper, it has good resistance to reduction acid and oxidizing acid, and stress corrosion cracking have good resistance, good resistance to pitting corrosion and crevice corrosion performance, can be used for chemical treatment, pollution control equipment, oil and gas pipelines, nuclear fuel postprocessing and production of sulfuric acid pickling equipment.

ALLOY 31 ( UNS N08031 / DIN W.Nr. 1.4562 )

A kind of nitrogen iron nickel chromium molybdenum alloy, fcc lattice structure, nitrogen content of 0.2% stable austenite phase, reducing tendency of intermetallic phase precipitation. Its properties is between the nickel base alloy and super austenitic stainless steel. It is suitable for use in chemical and petrochemical industry, environmental engineering, oil and gas production and other industrial fields.

NiMoNic 80A ( GH80A / UNS 07080 / DIN W.Nr. 2.4952 )

Nimonic80A is a kind of heat resisting alloy with a matrix of nickel and chromium, by adding aluminum and titanium alloy forming gamma prime to strengthened dispersion, except aluminum content is slightly higher, all other is similar to GH4033. Its using temperature is between 700 and 800 DEG C, has good creep resistance and oxidation resistance at 650 ~ 850 degrees. The alloy has a cold, hot work performance. Mainly used for hot rolling steel, cold drawn rods, hot-rolled sheet, cold-rolled sheet, strip and annular parts, used in the manufacture of rotor blades, guide vane bearing, bolt, blade lock plate and other parts.

NiMoNic 90 ( GH90 / UNS NO7090 )

Nimonic 90, a kind of aging strengthened nickel based wrought superalloy, containing a high amount of cobalt and reinforcing elements. The alloy has high tensile strength and high creep resistance between 815 to 870 DEG C, and good oxidation resistance and corrosion resistance. And high fatigue strength and good formability and welding under hot and cold alternately action. Mainly for production of hot rolled and cold drawn rods, cold-rolled sheet, strip and cold drawing wire. Mainly used for turbine engine turbine disc, blade, high temperature fasteners, clamps, sealing ring and an elastic element.

NiMoNic 93 ( GH93 / NCK20TA )

Nimonic 93 is a precipitation hardening nickel base alloy, cobalt and chromium containing high, has a high strength and good structural stability. When below 815 DEG C, it has good comprehensive performance. With good hot working plasticity, it can be produced to plates, bars and forgings, with main application for turbine blade of aeroengine, small engine turbine disk and fasteners.

0Cr17Ni4Cu4Nb ( 17-4PH )

The stainless steel has high strength, high hardness, good welding performance and corrosion resistance, it is used in high strength valves, shaft, turbine parts, offshore platforms, aerospace machinery parts  

0Cr13Ni5Cu3Nb ( 15-5PH )

It has good processing performance, excellent mechanical properties, normal resistance to corrosion environment, good strength, toughness and ductility. It is applied in the corrosion environment of aerospace, aircraft parts, high pressure valves corrosion, groove, fasteners, equipment and equipment.  

0Cr13Ni8Mo2Al ( PH13-8Mo )

The stainless steel has high strength, excellent toughness, good transverse mechanical properties, in the marine environment it has good resistance to stress corrosion resistance, good resistance to sulfide stress corrosion cracking performance. It is used in aerospace, nuclear reactors and petrochemical fields, such as cold forging and machining fasteners, aircraft parts, reactor components and petrochemical equipment.

0Cr16Ni6MoCuNb ( Custom 450 )

This martensitic stainless steel has high strength and excellent fracture toughness. It is used in aircraft structural components, such as engine assembly, aircraft flap guide, actuator, landing gear components, etc.

30CrMnSiNi2A

This steel has high strength, plasticity and toughness, good anti fatigue performance, low fatigue crack propagation rate. Mainly used for manufacturing high-strength connecting parts, shaft parts, landing chassis and other important force structure.  

40CrNi2Si2MoVA ( 300M )

This steel has high strength, good transverse ductility, excellent fracture toughness, good fatigue resistance, good stress corrosion resistance. Suitable for manufacturing structural parts like high strength parts, joints and shaft.

16Co14Ni10Cr2MoE

This steel has high strength, excellent comprehensive performance, good low and medium temperature performance and good welding performance. Mainly used for manufacture of long life and high strength structural parts, shaft parts and fasteners.  

00Ni18Co9Mo5TiAl ( 18Ni300 )

Even under condition of high strength and  high tenacity, this steel still has excellent plasticity, tenacty and fracture toughness, no cold hardening, small aging deformation, good welding performance, the surface can also be nitrided. Suitable for manufacturing high precision, ultra mirror, complicated cavity, large cross section, plastic mold for mass production.